Join A Call In Progress; Find Handset - VTech CS6419 User Manual

Telephone operation

Join a call in progress

You can use up to two system handsets at a time on an outside call. You can
buy additional expansion handsets (CS6409) for this telephone base. You can
register up to five handsets to the telephone base.
To join a call:
• When a handset is on a call, press
Press OFF/
•
CANCEL
hang up.

Find handset

Use this feature to find all system handsets.
To start the paging tone:
Press /FIND HANDSET on the telephone base once
•
and then release when the telephone is not in use. All idle
handsets ring and their screens show ** PAGING**.
To end the paging tone:
Press /FIND HANDSET on the telephone base once and
•
then release.
/FLASH,
• Press
• Place the handset in the telephone base or charger.
Do not press and hold /FIND HANDSET for more than four seconds. It may Do not press and hold /FIND HANDSET for more than four seconds. It may
• •
lead to handset deregistration. If 1.PRESS FIND HS ON BASE 4 SEC and lead to handset deregistration. If 1.PRESS FIND HS ON BASE 4 SEC and
2.THEN PRESS # ON HANDSET display alternately on the handset, refer to 2.THEN PRESS # ON HANDSET display alternately on the handset, refer to
Troubleshooting to register the handset to the telephone base. Troubleshooting to register the handset to the telephone base.
When you press OFF/ When you press OFF/
• •
handset is silenced but the paging tone continues on other handsets. handset is silenced but the paging tone continues on other handsets.
to exit the call. The call continues until all handsets
or any dialing key (0-9,
or MUTE/ or MUTE/
CANCEL CANCEL
/
or on another handset.
FLASH
or #) on the handset.
TONE
on a handset, the ringer of that on a handset, the ringer of that
DELETE DELETE
19