Enabling/Disabling Nacs; Enabling/Disabling City Tie; Enabling/Disabling The Dact; Enabling/Disabling The Status Relays - Siemens FireSeeker FS-250 Programming Manual

F S - 2 5 0 P R O G R A M M I N G

Enabling/Disabling NACs

The Notification Appliance Circuits may be disabled/enabled as follows:
Press Press "Outputs"
"Disable/Enable"

Enabling/Disabling City Tie

The City Tie Circuit may be disabled/enabled as follows:
Press Press "Outputs"
"Disable/Enable"

Enabling/Disabling the DACT

The DACT (Digital Alarm Communication Transmitter) may be disabled/enabled as
follows:
Press Press "Outputs"
"Disable/Enable"

Enabling/Disabling the Status Relays

The Status Relays may be disabled/enabled as follows:
Press Press "Outputs"
"Disable/Enable"
M A N U A L
Press "NACs"
Press "More" and
then press "City
Tie"
Press "More" and
then press "DACT"
Press "More", press
"More" and then
press "Status
Relays"
18
Enter the number of Use the
the NAC through "Enable(Disable)"
the keypad. The button to change
display will show the state of the
the current state NAC. Status will
toggle on the
display
The display will Use the
show the status of "Enable(Disable)"
the city tie button to change
the state of the City
Tie. Status will
toggle on the
display
The display will Use the
show the status of "Enable(Disable)"
the DACT button to change
the state of the
DACT. The Status
will toggle on the
display
The display will Use the
show the status of "Enable(Disable)"
the Status relays button to change
the state of the
Status Relays. The
status will toggle on
the display