F S - 2 5 0
P R O G R A M M I N G
Activating a Recall
It is possible to sound a Recall from the keypad using the following steps
Press "Menu"
Press "Recall"
Performing a Lamp Test
It is possible to perform a lamp test of the LEDs on the front of the Panel by following
the steps below:
Press "Menu"
Press "Lamp Test"
Viewing the event history
The Event History screen displays the last 2000 events reported to a panel. The
information displayed includes the date and time, the type of event (TRB, ALM, SUP
etc.), the device reporting the event and the event reported.
Press "Menu"
Press "View
History"
Accessing Maintenance functions
There are other functions available after the maintenance password has been
entered. Follow the steps below to access the maintenance functions
Press "Menu" and
Press "Maint. Level"
press "more" three
times
M A N U A L
Display requests
Yes/No
confirmation of the
Recall
LEDs in the front
panel will be lit for
approximately 5
seconds
The display will
show the most
recent event
The display will
show the screen to
enter the four digit
maintenance
password
15
Press "Yes" to
activate a Recall.
The display will
return to normal
indicating Recall
has been activated.
Reset panel or
press "Alarm
Silence" to stop.
The two buttons on
the left of the
display (M1 & M2)
will scroll forward
and backward
through the events.
The upper right
hand button
escapes back to the
user menu.
Enter the four digit
password (default is
0123) and press
"Enter"