Maintenance Level; Enabling/Disabling Devices; Enabling/Disabling Input Groups; Enabling/Disabling Applications - Siemens FireSeeker FS-250 Programming Manual

F S - 2 5 0 P R O G R A M M I N G

Maintenance Level

Following are the details of the Maintenance level functions

Enabling/Disabling Devices

The disable / enable screens allow the operator to disable or enable devices and
components of the system. System Inputs, Outputs, etc. can be disabled / enabled.
Press Press "Inputs"
"Disable/Enable"

Enabling/Disabling Input Groups

The input group may be disabled/enabled as follows
Press Press "Inputs"
"Disable/Enable"

Enabling/Disabling Applications

The applications in the FireSmart detector that prevent false activation often make it
difficult to test the detectors using canned smoke. This function allows the
Applications in the detectors to be turned off for testing. A trouble is posted as a
reminder to reset them later
Press Press "Appl."
"Disable/Enable"

Enabling/Disabling the Output Zones

The output zones may be disabled/enabled as follows:
Press Press "Outputs"
"Disable/Enable"
M A N U A L
Press "Devices"
Press "Groups"
The display will
show the current
status of the
applications.
Press "Zones"
17
Enter the address Use the
through the keypad. "Enable(Disable)"
When the address button to change
is entered, the the state of the
status of the device device. Status will
will be displayed toggle on the
display
Enter the address Use the
through the keypad. "Enable(Disable)"
When the address button to change
is entered, the the state of the
status of the group group. Status will
will be displayed toggle on the
display
Use the
"Enable(Disable)"
button to change
the status of the
applications in the
FireSmart detectors
Enter the address Use the
through the keypad. "Enable(Disable)"
When the address button to change
is entered, the the state of the
status of the zone zone. Status will
will be displayed toggle on the
display