Static Ip Address - D-Link DIR-320 User Manual

Section 3 – Configuration
To configure a Static IP type Internet connection, follow these steps:
1. Select the Static IP option from the My Internet Connection is:
pull-down menu.
2. Under the Static IP heading, type IP address information provided
by your ISP, type an IP Address, Subnet Mask and ISP Gateway
Address. The Primary DNS Address will be normally be required,
the Secondary DNS Address is used for a back up DNS server.
3. Some ISPs record the unique MAC address of your computer's
Ethernet adapter when you first access their network. This can
prevent the Router (which has a different MAC address) from being
allowed access to the ISPs network (and the Internet). To clone the
MAC address of your computer's Ethernet adapter, type in the
MAC address in the MAC Address field and click the Clone MAC
Address button.
4. Leave the MTU value at the default setting (default = 1500) unless
you have specific reasons to change this (see table below for more
information).
5. Click on the Save Settings button to save and apply the new
Internet connection settings.
D-Link DIR-320 User Manual

Static IP Address

When the Router is configured to use Static IP Address assignment
for the Internet connection, you must manually assign a global IP
Address, Subnet Mask, and ISP Default Gateway IP address. Most
users will also need to configure DNS server IP settings. Follow the
instruction below to configure the Router to use Static IP Address
assignment for the Internet connection.
19