D-Link DIR-320 User Manual page 26

Section 3 – Configuration
PPTP/L2TP Description
Enter the IP address of the router into this field. This address must be supplied to you by your ISP. This field will not be necessary
IP Address
to configure if the Dynamic IP option is chosen above the configuring field.
Subnet Mask Enter the IP address of the Subnet Mask into this field. This address must be supplied to you by your ISP. This field will not be
necessary to configure if the Dynamic IP option is chosen above the configuring field.
Gateway Enter the IP address of the gateway into this field. This address must be supplied to you by your ISP. This field will not be
necessary to configure if the Dynamic IP option is chosen above the configuring field.
DNS Enter the IP address of the DNS. This field will not be necessary to configure if the Dynamic IP option is chosen above the
configuring field.
MAC Address This field will instruct the user to enter the Media Access Control (MAC) address of the Ethernet Card of your computer, if
instructed to do so by your ISP. To quickly accomplish this, click the Clone MAC address button, which will automatically copy
the MAC address of your Ethernet card and enter it into the space provided, which will replace the MAC address of the router.
Server IP/Name Enter the Server IP address for this protocol into this field. This is the IP address of the server computer that will be used, along
with your computer, to create the Virtual Private Network. This field must be completed for both the Dynamic IP and Static IP
options
PPTP/L2TP Account Enter the PPTP/L2TP account name, provided to you by your ISP, here.
PPTP/L2TP Password Enter your password for this PPTP/L2TP account here, as stated to you by your ISP.
PPTP/L2TP Retype Retype the password entered in the PPTP/L2TP Password field.
Password
Maximum Idle Time A value of 0 in this field means that the PPTP/L2TP connection will remain connected. If your network account is billed according
to the amount of time the Router is actually connected to the Internet, enter an appropriate Idle Time value (in seconds). This
will disconnect the Router after the WAN connection has been idle for the amount of time specified. The default value = 5.
MTU This field refers to the Maximum Transfer Unit, which is the maximum size of a packet, in bytes, that will be accepted by the
router. The default setting is 1460 bytes. This field should not be altered unless instructed by your ISP.
Connect Mode Select This function, with Connect-on-demand selected, will allow the router to connect any workstation on your LAN to the Internet
upon request. If this function is set at Always-on, no request from the workstation will be needed to connect to the Internet. If
Manual is selected, it will be necessary for the workstation on the LAN to manually connect to the Internet through this router.
D-Link DIR-320 User Manual
23