Section 3 - Configuration
If you selected Static IP Address, configure the following information:
STEP 2: SELECT INTERNET CONNECTION TYPE
VPI:
Virtual path identifier (VPI) is the virtual path between two
points in an Asynchronous Transfer Network (ATM) network. Its
valid value is between 0 and 255. Enter the correct VPI provided
by your ISP.
VCI:
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is between 32 and
65535. Enter the correct VCI provided by your ISP.
IP Address:
Enter the IP address provided by your ISP.
Subnet Mask:
Enter the subnet mask provided by your ISP.
Select either 1483 Bridged IP LLC or 1483 Bridged IP VC-
Connection Type:
Mux.
Default Gateway:
Enter the default gateway provided by your ISP.
Click Next to continue and proceed to step 3.
D-Link DSL-2740M User Manual
Static IP Address
18