Wireless Network Settings - D-Link DIR-320 User Manual

Section 3 – Configuration

Wireless Network Settings

Use the Enable Wireless check box to disable or enable the wireless
interface. Wireless function is enabled by default.
The Wireless Network Name or SSID can be changed to suit your
wireless network. Remember that any wireless device using the access
point must have the same SSID and use the same channel. The SSID can
be a continuous character string (i.e. no spaces) of up to 16 characters in
length.
Wireless stations that support WPS can be configured automatically using
the Wi-Fi Protected Setup menu.
To manually configure security settings, select the Wireless Security
Mode form the pull-down menu and configure the settings for the security
method used. Follow the instructions below for the type of security used.
Click the Save Settings button to save any changes to the wireless
network settings.
D-Link DIR-320 User Manual
33