Configuration; Web-Based Configuration Utility - D-Link DIR-320 User Manual

Section 3 – Configuration

Configuration

This section will show you how to set up and configure your new D-Link router using the Web-based configuration utility.

Web-based Configuration Utility

Connect to the Router
To configure the WAN connection used by the router it is first necessary to communicate with the router through its management interface, which is
HTML-based and can be accessed using a web browser. The easiest way to make sure your computer has the correct IP settings is to configure it
to use the DHCP server in the router. The next section describes how to change the IP configuration for a computer running a Windows operating
system to be a DHCP client.
To access the configuration utility, open a web-browser such as Internet
Explorer and enter the IP address of the router (192.168.0.1).
Type "admin" for the User Name in the entry field. If this is the first time
configuring the router, leave the Password field blank, there is no default
password.
If you get a Page Cannot be Displayed error, please refer to the
Troubleshooting section for assistance.
D-Link DIR-320 User Manual
8