D-Link DIR-320 Quick Installation Manual

D-Link DIR-320 Quick Installation Manual

Wireless n150 router with 3g/cdma/lte support and usb port
Hide thumbs Also See for DIR-320:

Advertisement

Quick Links

Quick Installation Guide
DIR-320
Wireless N150 Router with 3G/CDMA/LTE Support
and USB Port

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DIR-320

  • Page 1 Quick Installation Guide DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port...
  • Page 2: Before You Begin

    For security reasons, router DIR-320 with default settings cannot connect to the Internet. To get started, please set your own password used to access the web-based interface and, if needed, configure other settings recommended by...
  • Page 3: System Requirements And Equipment

    DIR-320 Quick Installation Guide System Requirements and Equipment A computer with any operating system that supports a web browser. • A web browser to access the web-based interface of the router: • ◦ Apple Safari 5 and later ◦ Google Chrome 5 and later ◦...
  • Page 4: Supported Usb Modems

    GSM modems Alcatel X500 • D-Link DWM-152C1 • D-Link DWM-156A6 • D-Link DWM-156A7 • D-Link DWM-156C1 • D-Link DWM-157B1 • D-Link DWM-157B1 (Velcom) • D-Link DWM-158D1 • Huawei E150 • Huawei E1550 • Huawei E156G • Huawei E160G • Huawei E169G •...
  • Page 5 DIR-320 Quick Installation Guide CDMA modems Airplus MCD-650 • Airplus MCD-800 • AnyDATA ADU-300A • AnyDATA ADU-500A • AnyDATA ADU-510A • Huawei EC306 • ZTE AC5710 • ZTE AC5730 • LTE modems Huawei E3131 • Huawei E3272 • Huawei E3351 •...
  • Page 6: Pc With Ethernet Adapter

    DIR-320 Quick Installation Guide CONNECTING TO PC PC with Ethernet Adapter 1. Make sure that your PC is powered off. 2. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
  • Page 7 DIR-320 Quick Installation Guide Obtaining Address Automatically in OS Windows XP 1. Click the Start button and proceed to the Control Panel > Network and Internet Connections > Network Connections window. 2. In the Network Connections window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
  • Page 8 DIR-320 Quick Installation Guide 4. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button. 5. Click the ОК button in the connection properties window. Now your computer is configured to obtain an IP address automatically.
  • Page 9 DIR-320 Quick Installation Guide Obtaining Address Automatically in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
  • Page 10 DIR-320 Quick Installation Guide 6. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button. 7. Click the OK button in the connection properties window. Now your computer is configured to obtain an IP address automatically.
  • Page 11: Pc With Wi-Fi Adapter

    DIR-320 Quick Installation Guide PC with Wi-Fi Adapter 1. To connect via an LTE, 3G GSM or CDMA network: connect your USB modem to the USB port located on the left side panel of the router. If you need to connect or change a USB modem to another one when the router is powered on, power off the router, connect the modem to the USB port, and power on the router.
  • Page 12: Configuring Wi-Fi Adapter In Os Windows Xp

    3. Search for available wireless networks. 4. In the opened Wireless Network Connection window, select the wireless network DIR-320 and click the Connect button. 5. In the opened window, enter the network key (see WPS PIN on the barcode label on the bottom panel of the device) in the Network key and Confirm network key fields and click the Connect button.
  • Page 13: Configuring Wi-Fi Adapter In Os Windows 7

    DIR-320 Quick Installation Guide Configuring Wi-Fi Adapter in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
  • Page 14 Quick Installation Guide 6. In the opened window, in the list of available wireless networks, select the wireless network DIR-320 and click the Connect button. 7. In the opened window, enter the network key (see WPS PIN on the barcode label on the bottom panel of the device) in the Security key field and click the OK button.
  • Page 15: Configuring Router

    DIR-320 Quick Installation Guide CONFIGURING ROUTER Connecting to Web-based Interface Start a web browser. In the address bar of the web browser, enter the IP address of the router (by default, the following IP address is specified: 192.168.0.1). Press the Enter key.
  • Page 16 DIR-320 Quick Installation Guide When the web-based interface is accessed the next time and after, the login page opens. Enter the username (admin) in the Login field and the password you specified in the Password field, then click the Enter button.
  • Page 17 DIR-320 Quick Installation Guide After successful registration the Home / Information page opens. The page displays general information on the router and its software.
  • Page 18 DIR-320 Quick Installation Guide The web-based interface of the router is multilingual. If you need to select another language for the web-based interface, place the mouse pointer over the English caption in the top part of the page and select a language from the menu displayed.
  • Page 19: Configuring Connection To The Internet

    DIR-320 Quick Installation Guide Configuring Connection to the Internet You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your connection. Otherwise contact your ISP.
  • Page 20 DIR-320 Quick Installation Guide 6. If your operator requires to specify the access point name, in the USB modem section, fill in the APN field. 7. If your operator has provided the address of the DNS server, in the IP section, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
  • Page 21: Wan Connection

    DIR-320 Quick Installation Guide 3G WAN Connection If the PIN code check is enabled for the SIM card inserted into your USB 3G/LTE modem, then prior to creating a 3G WAN connection, proceed to the modem / PIN menu and enter the PIN code on the page displayed...
  • Page 22 DIR-320 Quick Installation Guide If you need to specify other settings, in the PPP section, enter authorization data provided by your operator (the username (login) in the Username field and the password in the Password and Password confirmation fields), or select the Without authorization checkbox if authorization is not required.
  • Page 23: Wired Wan Connection

    DIR-320 Quick Installation Guide Wired WAN Connection 1. Go to the Net / WAN page, select the WAN connection and click the Delete button. 2. Click the Add button. In the General settings section, in the Provider drop-down list, leave the Manually value.
  • Page 24 DIR-320 Quick Installation Guide 7. If your ISP uses MAC address binding, in the Ethernet section, in the MAC field, enter the MAC address registered by your ISP upon concluding the agreement. To set the MAC address of the network...
  • Page 25 DIR-320 Quick Installation Guide 9. For connection of PPPoE type: in the PPP section, enter authorization data provided by your ISP (the username (login) in the Username field in the Password and Password confirmation and the password fields), or select the Without authorization checkbox if authorization is not required.
  • Page 26 DIR-320 Quick Installation Guide For connection of Static IP type: in the IP section, fill in the IP Address, Netmask, Gateway IP address, and Primary DNS server fields. 12. For connection of Dynamic IP type: if your ISP has provided the address...
  • Page 27 DIR-320 Quick Installation Guide For connection of Static IPv6 type: in the IP section, fill in the IPv6 address and Gateway IPv6 address fields. 14. For connection of Dynamic IPv6 type: if your ISP has provided the address of the DNS server, in the IP section, deselect the Obtain DNS server addresses automatically checkbox and fill in the Static primary DNS server field.
  • Page 28 DIR-320 Quick Installation Guide 15. For connection of PPPoE + Static IP type: in the IP section, fill in the IP Address, Netmask, Gateway IP address, and Primary DNS server fields. Then in the PPP section, enter authorization data provided...
  • Page 29 DIR-320 Quick Installation Guide 16. For connection of PPPoE + Dynamic IP type: if your ISP has provided the address of the DNS server, in the IP section, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
  • Page 30 DIR-320 Quick Installation Guide 17. For connection of PPTP + Static IP or L2TP + Static IP type: in the IP section, fill in the IP Address, Netmask, Gateway IP address, and Primary DNS server fields. Then in the VPN section, enter...
  • Page 31 DIR-320 Quick Installation Guide 18. For connection of PPTP + Dynamic IP or L2TP + Dynamic IP type: if your ISP has provided the address of the DNS server, in the IP section, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
  • Page 32: Configuring Wan Backup Function

    DIR-320 Quick Installation Guide Configuring WAN Backup Function 1. Go to the Net / WAN page and create the main WAN connection. 2. On the Net / WAN page, create the reserve WAN connection. 3. Proceed to the Net / WAN reservation page and select the Enable reservation checkbox.
  • Page 33: Example Of Connection Via Vlans

    DIR-320 Quick Installation Guide Example of Connection via VLANs If your ISP provides: access to the Internet via the VLAN with the tag (VLAN ID) 2, the • PPPoE connection type, login user, password user_password, access to IPTV service via the VLAN with the tag (VLAN ID) 10, •...
  • Page 34 DIR-320 Quick Installation Guide 14. Click the Add button. 15. In the Name field, enter a name for the new group (IPTV). 16. From the Type drop-down list, select the Bridge value. 17. From the Tagged port drop-down list, select the internet value.
  • Page 35: Configuring Local Area Network

    DIR-320 Quick Installation Guide Configuring Local Area Network Go to the Net / LAN page. If needed, change the IP address of the router's LAN interface and the mask of the local subnet in the IP Address and Netmask fields. To change the IPv6 address of the router's LAN interface, deselect the DHCP PD checkbox in the IPv6 DHCP server section.
  • Page 36: Saving Settings To Non-Volatile Memory

    DIR-320 Quick Installation Guide Saving Settings to Non-volatile Memory In order to avoid losing the new settings upon hardware reboot (accidental or intentional power-off of the device), it is recommended to save the settings to the non-volatile memory of the router.
  • Page 37: Technical Support

    Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website. D-Link provides its customers with free support within the product's warranty period. Customers can contact the technical support group by phone or by e- mail/Internet.

Table of Contents