System Check - D-Link DIR-320 User Manual

Section 3 – Configuration

System Check

This menu is used to monitor port performance and connectivity, the menus
displayed are VCT Info and Ping Test.
VCT Info
The Virtual Cable Tester displays the current status of all ports.
Ping Test
The Ping Test section allows you to ping any IP address from the Router to
test connectivity to the address. To Ping a device, enter the IP address of the
device that you wish to ping into the Host Name or IP Address field and click
Ping to start the Ping mechanism. The results of the Ping will be shown under
the Ping Result heading.
D-Link DIR-320 User Manual
63