MSI MS-6580 Manual page 85

MS-6580 ATX Mainboard
Connecting the Speakers
When you have set the Multi-Channel Audio Function mode properly in
the software utility, connect your speakers to the correct phone jacks in
accordance with the setting in software utility.
2-Channel Mode for Stereo-Speaker Output
When this mode is selected, it is recommended to attach the speakers
to the Line Out connector on the back panel instead of the Line Out
connector on the S-Bracket.
Refer to the following diagram and caption for the function of each
phone jack on the back panel when 2-Channel mode is selected.
Select "Default Phone jack"
1 MIC
2 Line In
3 Line Out (Front channels)
4 Optical SPDIF jack
5 Coaxial SPDIF jack
Back Panel
MSI Reminds You...
When any Multi-Channel Audio Mode is selected, you may also
connect your speakers to the Optical or Coaxial SPDIF phone
jack on the S-Bracket to exprience digital surround sound effect.
A-8
Deselect "Default Phone jack"
1
2
3
4
5
2
4
3
5
1
MIC
Line In
Line Out (Front channels)
Optical SPDIF jack
Coaxial SPDIF jack
S-Bracket