MSI MS-6580 Manual page 65

MS-6580 ATX Mainboard
FDC/LPT/COM Ports, Primary/Secondary master/Slave IDE
These items specify if the BIOS will monitor the activity of the specified
hardware peripheral or component. If set to Monitor, any activity de-
tected on the specified hardware peripheral or component will wake up
the system or prevent the system from entering the power saving modes.
Settings: Monitor, Ignore.
Set WakeUp Events
Press <Enter> and the following sub-menu appears.
Resume On PME#
When set to Enabled, the feature allows your system to be awakened
from the power saving modes through any event on PME (Power Man-
agement Event). Settings: Enabled, Disabled.
Resume By Alarm
This is used to enable or disable the feature of booting up the system on
a scheduled time/date from the soft off (S5) state. Settings: Enabled,
Disabled.
Alarm Date/Hour/Minute/Second
If Resume By Alarm is set to Enabled, the system will automatically re-
sume (boot up) on a specific date/hour/minute/second specified in these
fields. Available settings for each item are:
3-18