MSI MS-6580 Manual page 56

1st/2nd/3rd Boot Device
The items allow you to set the sequence of boot devices where AMIBIOS
attempts to load the operating system. The settings are:
IDE-0
IDE-1
IDE-2
IDE-3
Floppy
ARMD-FDD The system will boot from any ARMD device, such as
ARMD-HDD The system will boot from ARMD device, such as MO
CD/DVD
Legacy SCSI The system will boot from the SCSI.
Legacy
Network
BBS-0
BBS-1
BBS-2
BBS-3
USB FDD
USB CDROMThe system will boot from the USB-interfaced CD-ROM.
USB HDD
USB RMD-FDD
USB RMD-HDD
Disabled
The system will boot from the first HDD.
The system will boot from the second HDD.
The system will boot from the third HDD.
The system will boot from the fourth HDD.
The system will boot from floppy drive.
LS-120 or ZIP drive, that functions as a floppy drive.
or ZIP drive, that functions as hard disk drive.
The system will boot from the CD-ROM/DVD-ROM.
The system will boot from the Network drive.
The system will boot from the first BBS (BIOS Boot
Specification) compliant device.
The system will boot from the second BBS (BIOS Boot
Specification) compliant device.
The system will boot from the third BBS (BIOS Boot
Specification) compliant device.
The system will boot from the fourth BBS (BIOS Boot
Specification) compliant device.
The system will boot from USB-interfaced floppy drive.
The system will boot from the USB-interfaced HDD.
The system will boot from any USB-interfaced ARMD
device, such as LS-120 or ZIP drive, that functions as a
floppy drive.
The system will boot from USB-interfaced ARMD
device, such as MO or ZIP drive, that functions as hard
disk drive.
Disable this sequence.
BIOS Setup
3-9