Display Of Error Codes And Troubleshooting; Displaying Error Codes And Clearing Them - Hitachi DZ-GX20A Service Manual

Troubleshooting > Display of Error Codes and Troubleshooting

4-4 Display of Error Codes and Troubleshooting

Restriction:
The information included in this section is exclusively for service personnel: Do not disclose it to
persons other than service engineers.
The DVD video camera/recorder is equipped with a self-diagnostic function: If the DVD video
camera/recorder detects any problem, it will choose an appropriate error code (4-digit
alphanumeric) and store it in flash memory: Display the error code to perform troubleshooting,
according to the content.

4-4-1 Displaying error codes and clearing them

(1) Display method
1) Use the battery or AC adapter/charger to power the DVD video camera/recorder.
2) Set the power switch to the position shown below. Then operate the DVD video camera/recorder
while watching the LCD monitor or viewfinder screen:
a) Both disc and card are loaded: "VIDEO" or "CARD PHOTO"
b) Only disc is loaded: "VIDEO"
c) Only card is loaded: "CARD PHOTO"
d) Neither disc nor card is loaded: "VIDEO"
3) When a disc or card, or both are loaded, press the DISC NAVIGATION button to display the
thumbnail screen. If neither disc nor card is loaded, this step is not necessary.
4) Display the error code screen using the following button operation:
Simultaneously press the SELECT, REC and
(2) Display clearing method
1) When neither disc nor card is loaded, press the STOP/CANCEL button to restore the normal
screen. When a disc or card is loaded, press the STOP/CANCEL button to restore the thumbnail
screen. To restore the normal screen, press the STOP/CANCEL button again or press the DISC
NAVIGATION button.
buttons.
4 - 18