Assigning Midi Functions With Imap; Imap Icontrols Pro Software Panel - ICON i-Controls Pro User Manual

Assigning MIDI functions with iMap

You can use iMap to assign the MIDI functions of your iControls Pro easily.
Note: If your iControls Pro is not connected to
your Mac/PC, a message of "There are no
MIDI input devices" will appear. Please
connect iControls
the provided USB cable.
TM

iMap iControls Pro software panel

4 Layer buttons
You may have 4 different "Layers" settings for different applications. Each
"Layer" can have its own control settings.
Layer 1: Select the available DAW's Mackie Control mode for Mackie control
protocol or Traktor mode for "MIDI Learn" function from the "Mode" pull
down menu.
Layers 2-4: User Define mode allows you to set your own midi function for
each control.
Assign MIDI functions to the fader
Select your desired MIDI functions for the fader.
Assign MIDI functions to the control buttons
Select your desired MIDI functions for the control button.
TM
Pro to your Mac/PC with
TM
(User define mode only)
(User define mode only)