Daisy Chain With Icontrols Pro Or Any I-Pro Series Controllers - ICON i-Controls Pro User Manual

Daisy Chain with iControls Pro or any
i-Pro series Controllers
You may daisy chain i-Pro series controllers including iControls Pro. Because
most of the i-Pro series controllers are USB bus-powered (iControls Pro is
powered by an external power adapter) the stability depends on the total
power demand of the chain. Please visit our website for recommendations
on daisy chain sequences for different i-series controllers.
Connect the first of the i-Pro series controllers to your
Mac/PC via the USB port
Select a USB port on your Mac/PC and insert the wide (flat) end of the USB
cable and the other small end (B-type USB pack) to i-Pro series controller.
Connect the next of the i-Pro series controllers
Insert the wide (flat) end of the USB cable to the first i-Pro series
controller 's second USB port and the other small end (B-type USB jack) to
the second i-Pro series controller's USB port.
Note: Due to the limitation of power supply via USB port, your connected devices
chain might excess the power supply limit of the USB port and cause malfunction.
For recommendations on the combination and daisy chain sequence of different
i-Pro series controllers, please visit the ICON website at the following link:
www.icon-global.com
USB2.0 Cable
1 2 3
1 2 3 4
Layer
Tra ck
Bank
Sel Sel Sel
Mute Mute Mute
Solo Solo Solo
Zoom
1 2 3
e1 e2
f1 f2
Layer
- +
1 2
3 4
Contro ls
4 5 6 7
Sel Sel Sel Sel Sel
Mute Mute Mute Mute Mute
Solo Solo Solo Solo Solo
4 5 6 7
e3 e4 e5 e6 e7
f3 f4 f5 f6 f7
8 M
Sel
Mute
Solo
8 M
e8 e9
f8 f9