Assigning Midi Functions With Imap; Icontrols Software Panel - ICON iControls Manual

Assigning MIDI functions with iMap

You can use iMap to assign the
MIDI functions of your iControls easily.
Please launch the iMap software,
a device selector screen will appear
as shown in diagram 1. Then click
the "iControls" button.
Note: If your iControls is not connected to
your Mac/PC, a message of "There are no
MIDI input devices" will appear. Please
connect iControls to your Mac/PC with
the provided USB cable.
TM
iMap iControls software panel
7
Assign the MIDI channels to the fader
1
Select your desired MIDI channel from 1-16 for the fader
Assign the CC number to the fader
2
Select your desired CC number from 0-127 in the pull-down menu for
the fader.
Assign the MIDI channels to the control buttons
3
Select your desired MIDI channel from 1-16 for the control button
Assign the CC number to the control button
4
Select your desired CC number from 0-127 in the pull-down menu for
the control button.
TM
TM
(1/3/5/8) (2/4/6/9)
TM
Diagram 1
Diagram 2
10 11 12 13
10