Side Panel Layout; Getting Started; Connecting Your Icontrols Pro Controller System - ICON i-Controls Pro User Manual

Jog wheel
The jog wheel is used for various purposes specific to the DAW application,
including shuttle and scrubbing functions.
Layer Buttons
These two buttons allow you to switch between the four layers. Each layer
can be set to different parameters for the faders, knobs and buttons etc.

Side Panel Layout

USB port (B-Type)
Functions as a MIDI port to your notebook (or computer) and compatible
software. Also provides power to your iControls Pro.
USB port
Use to daisy chain with the second unit of iControls Pro or any i-Pro
series controllers such as iDJ pro.

Getting Started

Connecting your iControls Pro controller system

Connect the iControls Pro to your Mac/PC via the USB port.
Choose a USB port on your Mac/PC and insert the wide (flat) end of the USB
cable. Connect the cable's small jack end to the iControls Pro. Your Mac/PC
should automatically "see" the new hardware and notify you that it is ready
to use.
Note: Make sure you have connected the 9V power supply adapter (provided) to
your iControls Pro as the USB-bus itself is not able to supply sufficient power to
the iControls Pro.
a
b
Diagram 1 Diagram 2