Front Panel Layout - ICON i-Controls Pro User Manual

Front Panel Layout

1 2 3 4
Layer
Track
Bank
Zoom
Functions described below for the different controls are based on the Mackie
Control mode that are set on layer 1 of the iControls Pro. You may set your own
midi functions for each control at the "User defined" mode for 2-4 layers with
the iMap software provided.
Channel faders
The eight 100mm motorized faders are generally used for controlling the
track volume of your DAW. Depending on your DAW, you may use the "Flip"
button to switch the function of these faders to change other settings.
They are all touch sensitive to allow override automation the moment you
touch a fader. Also, they are motorized; they will automatically move to
reflect the current level of the selected channels in your DAW application.
Any automation recorded in a project will be reflected by the fader positions.
Master fader
This 100mm motorized fader operates the same as the other 8 faders. It
controls your DAW software's master channel fader.
Knobs
The nine rotary encoder knobs are generally used for controlling the track
pan position, aux send levels and EQ of your DAW. You may also preset them
to adjust specific parameters within plug-ins and virtual instruments.
1 2 3
Sel Sel Sel
Mute Mute Mute
Solo Solo Solo
2
1 3
4 5 6
Sel Sel Sel
Mute Mute Mute
Solo Solo Solo
4 5 6
7 8 M
Sel Sel Sel
Mute Mute Mute
Solo Solo Solo
7 8