Installing Imap Software For Mac Osx - ICON i-Controls Pro User Manual

Set the iControls Pro's Mackie Control mode for your DAW
and make your own midi mapping for layers 2-4
Launch the iMap software and select the Mackie Control mode according
to your DAW or Traktor for "MIDI Learn" at the "Control Mode" pull down
menu on layer 1. Then set your preferred midi function for each controller
for layers 2-4. Press the "MIDI Devices" button to select the iControls Pro
as the MIDI input and output device. Press the "Send Data" button to
upload the settings.
Note: If iControls Pro does not appear on the pull-down menu, select "USB Audio"
as the MIDI In and Out device.
DAW setup
Dependent on what mode you have set your iControls Pro with iMap,
please set your DAW as followings:
User Define mode:
your DAW.
Mackie Control mode:
Pro at the MIDI In & Out sections.
Traktor mode:

Installing iMap Software for MAC OSX

Please follow the procedures below step-by-step to install your iMap
software to Mac OS X
Insert the Utility CD in your CD-Rom and
double click "i-Pro Series iMap" icon.
iMap "Device select" window pop-up, click the device button accordingly
to launch the iMap software.
Tips: By "drag and drop" the "i-Pro iMap" icon into the "Applications" folder, you
could create a "iMap" shortcut on your Mac's desktop.
Select iControls Pro as your MIDI In and Out device at
Add "Mackie Control" device and select iControls
Use MIDI Learn function to set your controls.
TM
TM
TM