ICON i-Controls Pro User Manual page 7

Control buttons
4a) Recording channel control buttons section
REC buttons - Activate and deactivate the recording state of the associated
channel. The switch will light red when the channel is armed.
SOLO buttons -
The switch will light green when the channel solo state is on and other
channels will be muted. You could solo multiple channel by pressing SOLO
buttons on additional channels.
MUTE buttons -
channel. The switch will light blue when the channel is muted. Mute the
channel.
SEL buttons - The SEL buttons activate the associated channels in the DAW
software in order to perform a specific operation (for example, when
adjusting EQ with the ASSIGNABLE ENCODERS, the SEL switch will be used
to choose the channel you want to adjust). When a channel is selected,
the associated SEL switch's red LED will light up
4b) Motorized fader control buttons section
Track < button -
channel).
Track > button -
channel).
BANK < button-
channel).
BANK > button -
master channel).
4c)
Transport and Zoom control buttons section
PLAY button - Activate the play function of the DAW.
STOP button - Activate the stop function of the DAW.
REC button - Activate the record function of the DAW.
REWIND button -
FAST FORWARD button -
LOOP button -
Zoom < button -
through the Graphical User Interface (GUI) of the DAW application.
Zoom > button -
through the Graphical User Interface (GUI) of the DAW application.
4d)
MIXER button -
READ button -
current audio track.
WRITE button -
the current audio track.
LOCK button -
Turn On and Off the solo state of the associated channel.
Activate and deactivate the mute state of the associated
Shift "one" channel up for all faders (except the master
Shift "one" channel down for all faders (except the master
Shift "eight" channels up for all faders (except the master
Shift "eight" channels down for all faders (except the
Activate the rewind function of the DAW.
Activate the fast forward function of the DAW.
Activate the loop function of the DAW.
The LEFT button is used to navigate (left movement)
The RIGHT button is used to navigate (right movement)
Press this button to launch the mixer window of theDAW.
Press the READ button to activate the read function of the
Press the WRITE button to activate the write function of
Activate to lock all motorized faders.