Memory Function - Miele T 8823 C Operating Instructions Manual

Programmable functions

Memory function

The electronics will memorise any
Extra options selected for a
programme. The duration selected
for the timed drying programmes will
also be stored in memory.
These settings will be selected
automatically the next time the
programme is chosen. You can either
accept these or change them by
pressing the appropriate button.
Follow steps (A,B,C ...) to
programme and store in memory.
Before you begin, first ensure that:
– The dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the indicator light for the
Start/Stop button lights up constantly. . .
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
seven times.
– The Low temperature indicator light
will briefly flash nine times.
58
The option selected will be displayed
by a number which will alternate with
P.
0 Default setting. Memory
deactivated.
I Memory.
(The Automatic plus indicator light
will also flash.)
E Pressing the Start/Stop button
switches from one to the other.
F Switch the dryer off.
The settings have been changed. You
can alter the settings again at any time.
Control
^ Repeat steps A to D.
^ Switch the dryer off after step D.