Memory Function - Miele T 8826 WP Operating Instructions Manual

Memory function

The electronics will memorise any
extra options selected for a
programme. The duration selected
for the Warm air or Cool air timed
drying programmes will also be
stored in memory.
These settings will be selected
automatically the next time the
programme is chosen. You can either
accept these or change them by
pressing the appropriate button.
Follow steps (A,B,C ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the Start/Stop button lights up
constantly . . .
C . . . and then release the Start/Stop
button.
D Press the Gentle tumble button six
times.
– The Gentle tumble indicator light will
flash 9 times briefly.
Programming functions
A number to show which option is
selected will appear in the display
alternating with the letter P.
0 Memory deactivated
(factory default setting)
I Memory activated
(the Automatic plus indicator light will
also flash)
E Pressing the Start/Stop button
switches between the options.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps A to D.
^ Switch the dryer off after step D.
59