Miele T 8823 C Operating Instructions Manual page 20

How to dry correctly
F Starting the programme
The indicator light for the Start/Stop
button will flash when a programme is
being selected. The flashing indicates
that a programme can be started.
^ Press the Start/Stop button.
The Start/Stop button will now light up.
Perfect Dry only flashes/illuminates
during programmes with drying levels.
It remains dark during time controlled
programmes (see "Operating the
tumble dryer").
Note: The duration shown in the display
is only an estimate and can change.
Before the end of a programme
The heating phase is followed by a
cooling down phase (Cooling down
lights up). The programme is not
finished until the cooling down phase
has been completed.
There is no cooling down phase with
Woollens handcare.
G Remove the laundry when the
programme has finished.
0 and Finished will appear in the
display to indicate that the programme
has finished. The buzzer (if selected)
will sound at intervals.
After the programme has finished, the
drum will continue to rotate for 2 hours
at intervals if the garments are not im-
mediately removed. This reduces
creasing.
There is no anti-crease with: Woollens
handcare.
^ Press the Door button.
^ Open the door.
20
^ Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
If the dryer is switched on and the door
is opened, the drum lighting will come
on. It will go out a few minutes later to
save energy.
^ Switch off the dryer by pressing the
jk button.
^ Clean the fluff filters.
^ Close the door.
^ Empty the condensed water
container (unless the dryer has been
connected for external drainage).
^ Check the condenser unit
intermittently and clean if necessary
(see "Cleaning and care").
Using the Cottons Normal Plus
programme is recommended for a
mixed cotton load and is the programme
used in energy consumption tests to
AS/NZS 2442 (Refer to
www.energyrating.gov.au website for
consumption data).