Miele T 8823 C Operating Instructions Manual page 38

Problem solving guide
Problem
Water leaks from the
machine after the
condenser unit has
been cleaned.
A programme cannot be
started.
Power cut.
The interior drum
lighting does not come
on.
38
Possible cause
– The inner cover of the
condenser unit has not
been locked properly
and/or the condenser
unit has not been
positioned correctly.
– There is a build-up of
fluff.
There is no immediate
cause.
When power is restored to the dryer after a power
cut, the programme will continue as long as the
cooling down phase had not been reached.
The lighting switches off
automatically (to save
energy).
Remedy
– Ensure that the
condenser unit is
positioned correctly
and lock the inner
cover.
– Check the rubber
seals.
– Use a cloth to remove
any visible fluff from the
inside of the condenser
unit housing.
– Is the dryer switched
on?
– Is the mains plug
plugged in?
– Is the door closed
properly?
– Has the fuse or circuit
breaker tripped?
– Switch the dryer off
and then on again.
– If the lamp needs to be
replaced, follow the
instructions: Refer to
the following: