Stopping The Engine - Honda Remote Engine Starter System User's Information Manual

1. Push the engine button on the transmitter for
1 second or less, then push the unlock/stop button
within 2 seconds.
2. The transmitter emits a beep, and sends a signal to
stop the engine. When the engine stops, the
transmitter emits a beep, and the OFF indicator is
shown on the display.
ENGINE
BUTTON
UNLOCK/
STOP
BUTTON
© 2012 American Honda Motor Co., Inc. - All Rights Reserved.
NOTE
•
•
•
ENGINE-OFF
INDICATOR
B127550H
When the RF signal from the
transmitter does not carry to the
receiver, the transmitter emits three
short buzzer sounds and reception
failure indicator is shown on the
display.
The engine cannot be stopped with
the transmitter when it was started using the ignition
key.
In some cases the remote transmission range can be
longer than the reception range. Therefore the engine
can be started/stopped, and the remote status may
not be displayed.

Stopping the Engine

RECEPTION
FAILURE
INDICATOR
B127540H
19