Starting The Engine - Honda Remote Engine Starter System User's Information Manual

1 10-minute mode
1. Push the engine button on the transmitter for
1 second or less, then push in the lock/start button
within 2 seconds.
2. The transmitter emits two rapid beeps and sends a
signal to start the engine.
3. When received the answerback signal from the
vehicle, the transmitter emits two rapid beeps, and
the reception indicator is shown on the display.
4. The checking indicator is blinking until the engine
start is confirmed.
5. After starting the engine, the transmitter emits
another sound, and the each indicator is shown on
the display.
© 2012 American Honda Motor Co., Inc. - All Rights Reserved.
ENGINE
BUTTON
LOCK/
START
BUTTON
*1 Only on vehicles equipped with the automatic climate control.
This indicator is displayed for some vehicles among them.

Starting the Engine

RECEPTION
INDICATOR
CHECKING
INDICATOR
Blinking
ENGINE
RUNNING
INDICATOR
REMAINING
*1
IDLING TIME
IN-CAR
*1
TEMPERATURE
B127121H
13