Control Panel; Turning The Appliance On - DeLonghi C Series Instructions For Use Manual

CONTROL PANEL

DESCRIPTION
A ON/STAND-BY button
B MODE selection button:
Air conditioning, dehumidifying, fan.
C Fan speed selection button (HIGH/MED/LOW/AUTO)
D Timer button
E Programmed operation increase temperature/time button
F Programmed operation decrease temperature/time button
G Display Displays the temperature values set and the
programmed operating time
NOTE: Never turn the air conditioner off by unplugging from the outlet. Always press the
before unplugging. This allows the appliance to perform a cycle of checks to verify operation.

TURNING THE APPLIANCE ON

Before plugging the appliance check the cap on back of
the unit are correctly inserted on drainage hose "8".
Plug into an outlet. Two lines appear on the display
indicating that the appliance is in stand-by. Press the ON/
STAND-BY button (A). When turned on, the air conditioner starts
operating in the same mode as when it was turned off. Press the
MODE button (B) until the light corresponding to the desired
mode lights up:
Light (Q) : air-conditioning mode
Light (P) : dehumidifying mode
Light (O) : fan mode
C I F G R H
L
M
N
E
Q
P
D
O
H Timer in operation indicator light
I/L/M/N Fan speed lights and AUTO lights
O Fan mode light
P Dehumidifying mode light
Q Air conditioning mode light
R Remote control receiver
AIR CONDITIONING MODE
Ideal for hot muggy weather when you need to cool and
dehumidify the room. To set this mode: press the + (E) or - (F)
buttons until the desired temperature is displayed
Then select the fan speed by pressing the " FAN " button (C) until
the light corresponding to the required fan speed lights up:
MAXIMUM SPEED to achieve the target temperature as
rapidly as possible
MEDIUM SPEED reduces noise levels while maintaining a
comfortable temperature
LOW SPEED for silent operation and maximum energy
efficiency
AUTO: the appliance automatically selects the most suitable fan
speed in relation to the temperature set on the digital display
and current room temperature.
7
B A
button, then wait for a few minutes
.