Table of Contents
Advertisement
Two arrows on the display indicate respectively air-conditioning
"COOL" and the fan speed.The most suitable temperature for the
room during the summer varies from 75 to 80°F (24 to 27°C).
You are recommended, however, not to set a temperature much
below the outdoor temperature.
DEHUMIDIFYING MODE
Ideal to reduce room humidity (spring and autumn, damp
rooms, rainy periods, etc).
In dehumidifying mode, the appliance selects fan speed
automatically.
Two arrows on the remote control display indicate "DRY" and
"AUTO" respectively.
FAN MODE ONLY
In fan mode, fan speed can be set by pressing the fan button
"FAN" (16). The fan speed changes between the speeds available
(LOW/MED/HIGH). Two arrows on the display indicate the fan
mode and the speed set. In this mode, the auto speed cannot
be selected.
SETTING THE TIMER
The timer can be used to delay appliance start up or shutdown.
This avoids wasting electricity by not operating the appliance
when it is not needed.
How to program delayed shutdown
•
With the air conditioning unit on, press the timer button
timer (19). The time is displayed and the "h" symbol flashes,
with a flashing arrow indicating timer shut-down.
•
Set the time when you want the appliance to go off using
the
buttons (from 30 minutes to 24 hours). During the
first ten hours, you can select half hour intervals. For times
greater than ten hours, one hour intervals can be selected.
•
Press the timer button timer (19) again to confirm the
selection. The appliance emits a beep and the light
(H) flashes on the control panel, confirming successful
activation of the timer. A countdown of the time left is
displayed on the remote control display and the light (H)
flashes on the air conditioner display.
•
At the end of the set time the appliance switches off
automatically.
•
To cancel the timer programming, press the timer button
timer (19) again. The appliance emits a beep and both
displays reset to display the settings prior to activation of
the timer.
How to program delayed start up
•
With the air conditioner off, press the press the timer
button (19) . An arrow indicating "timer start-up" flashes
on the display. Now make all the desired settings for when
the appliance will switch on (operating mode, fan speed
and temperature). Confirm the settings by pressing the
timer button (19). The time is displayed and the "h" symbol
flashes.
Set the time when you want the appliance to switch off
using the buttons
During the first ten hours, you can select half hour intervals.
For times greater than ten hours, one hour intervals can be
selected.
•
Press the timer button (19) again to confirm the start-up
time. A beep sounds and the time set is also displayed on
the control panel, confirming setting of the timer. The light
(H) flashes on the air conditioner display. A countdown of
the time left is displayed on both displays.
•
At the end of the set time the appliance switches on
automatically, with the settings made previously.
•
To cancel the timer programming, press the timer button
(19) again. The appliance emits a beep and both displays
reset to stand-by.
TIPS
To ensure optimal performance from your portable air
conditioner, follow these recommendations:
•
Close the windows and doors in the room to be air
conditioned.
The only exception is when the appliance is installed
through a hole in the wall.
In this case, you are recommended to leave a slight draught
through a door or window to guarantee correct ventilation.
•
Protect the room from direct exposure to the sun by
partially closing curtains and/or blinds to help the
appliance run more efficiently.
10
(from 30 minutes to 24 hours).
close doors and windows
- Quick Links:
- Control Panel
Hide quick links:
Advertisement
Table of Contents
