Verifying Domain Membership; Setting Up A Cluster User Account - Fujitsu Siemens Computers MegaRAID 320 User Manual

and
from Node 1.
Then you would type:
and
from Node 2.
To confirm name resolution, ping each node from a client using the
node's machine name instead of its IP number.
4.4.7

Verifying Domain Membership

All nodes in the cluster must be members of the same domain and must
be capable of accessing a domain controller and a DNS Server. You can
configure them as either member servers or domain controllers. If you
configure one node as a domain controller, configure all other nodes as
domain controllers in the same domain.
4.4.8

Setting Up a Cluster User Account

The Cluster Service requires a domain user account under which the
Cluster Service can run. Create the user account before installing the
Cluster Service. Setup requires a user name and password. This user
account should not belong to a user on the domain.
To set up a cluster user account.
1. Click on Start.
2. Point to Programs, then point to Administrative Tools.
3. Click on Active Directory Users and Computers.
4. Click the plus sign (+) to expand the domain name (if it is not already
4-12 Installing and Configuring Clusters
Copyright © 2003 by LSI Logic Corporation. All rights reserved.
Ping 192.168.0.172
Ping 10.1.1.1
Ping 192.168.0.172
10.1.1.1
expanded.)