Table of Contents
Advertisement
4.4.3.1
Renaming the Local Area Connections
To clarify the network connection, you can change the name of the Local
Area Connection (2). Renaming helps you identify the connection and
correctly assign it. Follow these steps to change the name:
1. Right-click on the Local Area Connection 2 icon.
2. Click on Rename.
3. In the text box, type
4. Repeat steps 1 through 3 to change the name of the public LAN
5. The renamed icons look like those in the picture above. Close the
4.4.4
Setting Up the First Node in Your Cluster
To set up the first node in your cluster:
1. Right-click on My Network Places, then click on Properties.
2. Right-click the Private Connection icon.
3. Click on Status. The Private Connection Status window shows the
4. Click on Close
5. Right-click Private Connection again
6. Click on Properties.
7. Click on Configure.
8. Click on Advanced. The network card adapter properties window
9. Set network adapters on the private network to the actual speed of
Cluster Installation
Copyright © 2003 by LSI Logic Corporation. All rights reserved.
Private Cluster Connection
and press Enter.
network adapter to Public Cluster Connection.
Networking and Dial-up Connections window. The new connection
names automatically replicate to other cluster servers as the servers
are brought online.
connection status, as well as the speed of connection.
If the window shows that the network is disconnected, examine
cables and connections to resolve the problem before proceeding.
displays.
the network, rather than the default automated speed selection.
4-9
Advertisement
Table of Contents
