Table of Contents
Advertisement
Chapter 2
MegaRAID 320-1, -2, -2X, -4X
Hardware Installation
This chapter describes the procedures for installing the MegaRAID 320-
1, -2, -2X, and -4X storage adapters. It contains the following sections:
•
•
•
•
2.1
Requirements
The following items are required to install a MegaRAID 320 storage
adapter:
•
•
•
•
•
LSI Logic strongly recommends using an uninterruptible power supply
(UPS).
MegaRAID 320 Storage Adapters User's Guide
Copyright © 2003 by LSI Logic Corporation. All rights reserved.
A host computer with an available 32- or 64-bit, 3.3 V PCI or PCI-X
expansion slot
The Universal Driver Suite CD
The necessary internal and/or external SCSI cables
Ultra, Ultra2, Ultra160, or Ultra320 SCSI hard disk drives (although
backward compatible, SCSI uses the speed of the slowest device on
the bus)
2-1
Advertisement
Table of Contents
