Megaraid 320-2X Layout; Megaraid 320-2X Headers And Connectors - Fujitsu Siemens Computers MegaRAID 320 User Manual

Figure 3.3

MegaRAID 320-2X Layout

J1 J2
External
Very High-
Density
68-pin SCSI
J7
Connector
Channel 0
J19
External
Very High-
Density
J14
68-pin SCSI
Connector
Channel 1
J17
J18
Table 3.3

MegaRAID 320-2X Headers and Connectors

Connector Description
J1 Termination Enable Channel 0
J2 Termination Enable Channel 1
J5 Internal SCSI Channel 0
Connector
J6 Internal SCSI Channel 1
Connector
J7 External SCSI Channel 0
Connector
3-6 MegaRAID 320 Storage Adapter Characteristics
Copyright © 2003 by LSI Logic Corporation. All rights reserved.
Internal High-Density
68-pin SCSI Connector
Channel 0
J5
Type
3-pin header
3-pin header
68-pin connector
68-pin connector
68-pin connector External very high-density SCSI bus
Internal High-Density
68-pin SCSI Connector
Channel 1
J6
U6
Comments
Jumper on pins 1-2: Software uses
drive detection to control SCSI
termination (default: do not change).
Jumper on pins 2-3: Onboard SCSI
termination disabled.
No jumper: Onboard SCSI
termination enabled.
Internal high-density SCSI bus
connector.
connector.
J11
J13
J12