Pride Mobility The Ultimate In Style & Performance Owner's Manual page 33

V I I I . D I S A S S E M B L Y A N D A S S E M B L Y
6. Lift both batteries from the Cyclone using the battery lifting strap located on the top of the battery.
7. Disconnect the handbrake cable from the rear hub by pushing forward and holding the brake release lever
withyour thumb. See figure 22. Lift the cable release hook free of the peg and slide the handbrake cable free
of its slot on the brake mount. See figure 23. Move the cable safely out of the way.
PUSH BRAKE
RELEASE LEVER
FORWARD
FIGURE 22. DISENGAGE HANDBRAKE CABLE
8. Gently lower the tiller down to the Cyclone chassis.
9. Push the locking cam levers forward and remove the ball detent pins. See figures 24 and 25.
UNLOCKED POSITION
UNLOCKED POSITION
FIGURE 24. LOCKING CAM LEVERS
10. Gently slide the two sections of the Sport Scooter apart. See figure 26.
FIGURE 26. SEPARATING THE FRAME SECTIONS
NOTE: There is no need to disconnect the motor harness when disassembling the Cyclone. See figure 27.
Cyclone
LIFT UP THE
CABLE RELEASE
HOOK
FIGURE 23. DISENGAGE HANDBRAKE CABLE
FIGURE 25. BALL DETENT PINS WITH RINGS
FIGURE 27. MOTOR HARNESS
HANDBRAKE
CABLE
BRAKE
MOUNT
33