Pride Mobility The Ultimate In Style & Performance Owner's Manual page 39

X I . C A R E
CONSOLE, CHARGER, AND ELECTRONICS MODULE
n Keep these areas free of moisture.
n If any of these items do become exposed to moisture, let them dry thoroughly before operating your Cyclone
again.
STORAGE
See V. “Batteries and Charging.”
REAR LIGHTS
The light bulbs for the rear running lights and turn indicators are easily replaceable.
NOTE: Replacement light bulbs can be purchased from your authorised Pride provider.
CAUTION! Do not use regular automotive-type 12-volt light bulbs; your Cyclone is equipped with a
24-volt electrical system.
To replace a bulb:
n Remove the light cover which is held in place with three (3) Phillips head screws.
n Gently remove the bulb by pulling it straight up. See figure 8.
n Insert a new 24V, 5-watt bulb.
n Replace the light cover.
FUSES
In the event a fuse should cease to work:
n Remove the fuse by pulling it up and out of its slot.
n Examine the fuse to be sure it is blown. See figures 9 and 10.
n Insert a new fuse of the proper rating.
n Turning signals and rear lights — replace with a 3-amp fuse. Each light bulb has its own fuse.
n Control console assembly — replace with a 3-amp fuse.
n Charging system — replace with a 5-amp fuse.
Cyclone
A N D M A I N T E N A N C E
39