Operation - Pride Mobility The Ultimate In Style & Performance Owner's Manual

BEFORE GETTING ON YOUR CYCLONE
n Have you fully charged the batteries? See V. “Batteries and Charging.”
n Is the manual freewheel lever in the drive (down) position? Never leave the manual freewheel lever pulled up
unless you are manually pushing your Cyclone.
GETTING ON YOUR CYCLONE
1. Make certain that the key is removed from the key switch.
2. Stand at the side of your Cyclone.
3. Push down on the seat rotation lever and rotate the seat until it is facing you.
4. Make certain that the seat is locked securely in position.
5. Position yourself comfortably and securely in the seat.
6. Push down on the seat rotation lever and rotate the seat until you are facing forward.
7. Make certain that the seat is locked securely in position.
8. Make certain that your feet are safely on the floorboard.
PRE-RIDE ADJUSTMENTS AND CHECKS
n Are you positioned comfortably in the seat? See “Getting On Your Cyclone,” above.
n Is the seat at the proper height? See VII. “ Comfort Adjustments.”
n Is the seat locked securely in place? See VII. “Comfort Adjustments.”
n Is the tiller at a comfortable setting and locked securely in place? See VII. “Comfort Adjustments.”
n Is the key fully inserted into the key switch and in the “on” position? See IV. “Your Cyclone.”
n Is the maximum speed LED set to a slow setting? See IV. “Your Cyclone.”
n Are you grasping the handgrips with a thumb resting on each side of the throttle control lever? See IV. “Your
Cyclone.”
n Is the Turbo ready indicator LED working?
n While the Scooter is stationary, turn the tiller to more than one-eighth (1/8) of a turn to the left and right —
the Turbo ready indicator LED should not be lit when in these positions.
n Return the tiller to the center (straight ahead) position — the Turbo ready indicator LED should illuminate.
n Does your Cyclone’s horn work properly?
n Is your proposed path clear of people, pets, and obstacles?
n Have you planned your route to avoid adverse terrain and as many inclines as possible?
OPERATING YOUR CYCLONE
After planning your route:
n Adjust the maximum speed LED on the control console assembly to your desired speed.
n Press your thumb against the appropriate throttle control lever.
n The electric brake automatically disengages and the Cyclone accelerates smoothly to the speed you preselected
with the speed adjustment buttons, which is displayed on the maximum speed LED.
Cyclone
V I . O P E R A T I O N
27