Control Functions - THOMSON LDK 20 S Operator's Manual

Control Functions

7
Camera installation menu selection switch
1
This switch when pressed brings the camera installation
menu directly to the viewfinder screen. The LED lights
while the menu is displayed.
Viewfinder menu selection switch
2
This switch when pressed brings the viewfinder menu
directly to the viewfinder screen. The LED lights while
the menu is displayed.
Intercom menu selection switch
3
This switch when pressed brings the intercom menu
directly to the viewfinder screen. The LED lights while
the menu is displayed.
Audio menu selection switch
4
This switch when pressed brings the audio menu to
directly the viewfinder screen. The LED lights while
the menu is displayed.
Location of Controls and Functions
1 2 3 4 5
On Air
Power
Sys/Iso
light
Remote
Camera View
Intercom Audio
install finder
Function Function Function Function
A B C D
Filter Filter Filter Filter
1 2 3 4
Operator's Manual LDK 20(S) - Studio Camera
6
Camera Switch Panel
Auto
VTR
white
R
Ext.1
G
Ext.2
Select
B
Y/Ext.
Filter Filter -G
Call
5 6
Up/Down function selection switches
5
These two up/down scroll switch are used to move
through the various menus of the control system or to
set a particular value for a function.
Select switch
6
This switch, when pressed, selects the particular
menu that is pointed out by the cursor in the viewfinder
display or sets an on/off function.
User-defined menu switches
7
These four function switches can be programmed to
bring a user-defined menu directly to the viewfinder
screen. Refer to section 5 for further instructions on
how to set up these switches.Audio / Intercom
4-9