Control Functions - THOMSON grass valley LDK 6000 MKII Series User Manual

Control Functions

The system menus are displayed in the viewfinder. There are
two controls at the front of the camera that allow you to
navigate through these menus.
The functions handled by the system menus are divided into
eight different menus that are listed in the main menu as
follows:
VF
Lens
Video
Install
Files
Security
Diagnostics
Service
(Some of these items may not appear if the user level is not
set to 3.)
Each of these menus gives you access to a particular group
of functions.
4-12
2 1
1
2
>>
>>
>>
>>
>>
>>
>>
>>
Operator's Manual - LDK 6000 mkII
System Menu Rotary control
This rotary control is used to move through the various
menus of the control system. It is also used to vary the value
of some functions.
System Menu Select switch
This switch, when pressed, selects the particular menu that
is pointed out by the cursor in the viewfinder menu display.
It is also used to set an on/off function or to select a value from
a list.
More information on using the system menus is contained in
Section 6.
Location of Controls