Table of Contents
Advertisement
Auxiliary Functions
Teleprompter output connector
7
This BNC connector provides the teleprompter video
signal which is applied to the teleprompter input
connector of the base station.
If the CVBS output signal of the camera base station
is connected to the teleprompter input, then this
teleprompter output connector provides the CVBS
signal for colour monitoring.
8
Tracker connector
This 11-pole female socket provides full intercom and
signalling facilities for the dolly or crane driver (see
installation manual).
Location of Controls and Functions
Connector Panel Left
T1A/115V
T0,4A/230V
Connector Panel Right
2
1
Operator's Manual LDK 20(S) - Studio Camera
Floor
Progr
VF
Trac ker
TP
Eng
70VA
Max.
Off
Prod
7
8
9
VTR
Ref
Aux
Power
CVBS
Data
Off
W arning:
This apparatus
230V~T1,6A
must be earthed
115V~T4A
10
Auxiliary connector
9
This 11-pole female socket provides analogue control
signals and facilities for the connection of a private
data channel (see installation manual).
10
Data connector
This connector allows the direct connection of the
Operational Control Panel (OCP) or the Master Control
Panel (MCP) from the Series 9000 in order to control
camera functions.
Eng
Prod
50-60Hz
4-13
Advertisement
Table of Contents
