THOMSON LDK 20 S Operator's Manual page 20

Multiple camera mode
LDK 20(S)
LDK 20P(S)
LDK 20 PS-SuperEXpander
The third configuration is the multiple camera Triax
mode. The camera is connected to a base station as
in the single camera Triax mode, however, in an
environment with up to fifteen cameras the data bus
is looped-through from base station to base station.
The OCPs used to control the cameras are also
connected to the same data bus. A master control
3-4
HiRes
Digital
Triax cable,
maximum length:
2400 m (7,875 ft.)
with 16 mm cable
AC power supply
Triax cable,
maximum length:
2400 m (7,875 ft.)
with 16 mm cable
AC power supply
BTS BTS BTS
Triax cable,
maximum length:
2400 m (7,875 ft.)
with 16 mm cable
AC power supply
Operator's Manual LDK 20(S) - Studio Camera)
Base station
LDK 4053
Mains
Base station
LDK 4053
Mains
Base station
LDK 4053
Mains
Two-wire
data cable,
maximum length:
350 m (1,150 ft.)
panel (MCP) can also be connected to this data bus
to extend the control facilities. The LDK 20P(S) portable
camera and the LDK 20P(S) with SuperEXpander are
of course the ideal companions for the LDK 20(S).
Operational Control Panels
Mains AC power supply
of OCPs
Master Control Panel
Mains AC power supply
of MCP
Configurations