Lens - THOMSON LDK 20 S Operator's Manual

Lens

Support
Rail
To mount a standard size lens to the camera head
proceed as follows:
a. Ensure that the lens locking handle
unlocked position.
b. Remove the dust protection cap
c. Hook the lens onto the support rail ensuring that the
upper lens pin fits into the slot in the support rail.
3
d. Swing the lens downwards so that the lower lens
pin fits into the hole in the front of the camera.
4
e. Turn the lens locking handle clockwise to secure
the lens in place.
To remove the lens follow this procedure in reverse.
2-4
Support
3

Lens

1
Rail
Locking
Slot
Handle
2
protection
cap
is in the
1
.
2
Operator's Manual LDK 20(S) - Studio Camera
3
4
Dust
Always mount the dust protection cap when the
lens is not connected to the camera.
HiRes
Digital
Note
Assembling the Units