Gain Selection; Optical Filter Selection - THOMSON LDK 20 S Operator's Manual

Gain selection

Depending on the available light levels it may be
necessary to adjust the gain of the camera. The gain
is selected via the Operate menu. When this function
is selected initially, a list of the available values for the
gain is displayed in the viewfinder. The cursor marks
the current value. A new value is chosen by scrolling
up or down through the available values. The viewfinder
display is as follows:
Gain dB
111
The selection is made when the cursor is moved to a
new value. The display disappears 1 second after the
release of the button.
5-4
12
6
0
-3
2-4
Operator's Manual LDK 20(S) - Studio Camera

Optical filter selection

A filter can be placed in the path of the optical signal
to restrict the incoming light or for artistic effect. The
filter is selected via the filter switches on the rear
panel. The filters can also be selected via the VF/
Lens-Lens-Filter menu, a list of the available positions
of the filter wheel is displayed in the viewfinder. The
cursor marks the current value. A new position can be
chosen by pressing another switch or by scrolling up
or down through the available choices. The viewfinder
display is as follows:
Filter
331
The selection is made instantaneously when the
cursor is moved. The display disappears after 1
second when the button is released. There are more
choices available than are visible in the display. Scroll
up or down to see all the options. The standard position
is clear (CLR).
Clr
2
3
4
5
1-7
Shooting