Making Changes - THOMSON LDK 20 S Operator's Manual

Making Changes

If there are no double arrows then the Select switch
can be used to make a selection.
If On or Off is displayed after the function name then
pressing the Select switch toggles this value.
pressing Select switches on the colour bar
If an analogue value is displayed after the function
name then pressing the Select switch places the
cursor in front of the value and the up/down selection
switches are used to change it. Press the Select
switch to return the cursor to the selection list.
use the up/down selection switch to change this value
Operating the Menu System
If a switchable value is displayed after the function
name then pressing the Select switch places the
cursor in a selection menu indicating the current
choice. Use the up/down selection switches to change
the value. Press the Select switch to return the cursor
to the selection menu.
If the value is indicated by --- then it is not available for
change.
Operator's Manual LDK 20(S) - Studio Camera
if you press Select, you will return to the Gain menu
6-3