THOMSON LDK 20 S Operator's Manual page 35

1 Intercom isolation switch
Touching this switch isolates the cameraman, floorman
and tracker intercom systems from the engineering
and production system. The yellow LED in the switch
lights when the system is isolated. Touching the
switch again reconnects the systems.
2 Cameraman headset programme volume
This control varies the volume of the programme
intercom signal to the cameraman's headset.
3 Cameraman headset production volume
This control varies the volume of the production
intercom signal to the cameraman's headset.
4 Cameraman headset engineering volume
This control varies the volume of the engineering
intercom signal to the cameraman's headset.
5 Engineering intercom signal selection
A 3-position switch for the engineering intercom which
switches it on or off. The third position PTT (Push To
Talk) is a momentary position allowing the cameraman
to talk to engineering when the switch is held down.
6 Production intercom signal selection
A 3-position switch for the production intercom which
switches it on or off. The third position PTT (Push To
Talk) is a momentary position allowing the cameraman
to talk to engineering when the switch is held down.
7 Cameraman intercom connector (RTC)
Headsets with dynamic or carbon type microphones
can be connected to this socket (see installation
manual).
8 Cameraman intercom connector
Headsets with dynamic or carbon type microphones
can be connected to this socket (see installation
manual).
Location of Controls and Functions
Headsets with dynamic or carbon type microphones
can be connected to this socket (see installation
manual).
10
This control varies the volume of the programme
intercom signal to the floorman's headset.
This control varies the volume of the engineering
intercom signal to the floorman's headset.
12
This control varies the volume of the production
intercom signal to the floorman's headset.
13
A 3-position switch which routes the floorman's
intercom microphone signal to engineering (ENG) or
production (PROD), or turns off the intercom.
14
Balanced input for high quality microphone. A phantom
power supply (48V) can be internally selected (see
installation manual). The gain of this audio channel
can be controlled from the base station.
15
Balanced input for high quality microphone. A phantom
power supply (48V) can be internally selected (see
installation manual). The gain of this audio channel
can be controlled from the base station.
Operator's Manual LDK 20(S) - Studio Camera
9 Floorman intercom connector
Floorman headset programme volume
11 Floorman headset engineering volume
Floorman headset production volume
Floorman Intercom routing switch
Audio Ch. 2 microphone connector
Audio Ch. 1 microphone connector
4-11