KCM-3211 Hardware User’s Manual 0. Precautions Read these instructions You should read all the safety and operating instructions before using this product. Heed all warnings You must adhere to all the warnings on the product and in the instruction manual. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other equipment.
KCM-3211 Hardware User’s Manual Features and Benefits This is a cutting edge network video surveillance camera. It can capture, compress and transmit real time video in excellent quality (8 FPS 4Megapixel, 2032 x 1920). This camera is your best choice to build an intelligent IP surveillance system.
KCM-3211 Hardware User’s Manual Software Development Kit Support This IP Box Camera can be integrated or controlled by applications from third party software developers. Software developers can save considerable efforts by using our Streaming Library or ActiveX control. Safety Instructions Don’t use the power supply with other voltages...
Page 7
KCM-3211 Hardware User’s Manual qualified service personnel under the following conditions. 1) When the power-supply cord or plug is damaged 2) If liquid has been spilled, or objects have fallen into the video product. 3) If the video product has been directly exposed to rain or water.
KCM-3211 Hardware User’s Manual Physical description DC 12v Power Input Reset Button Power Button Micro SD / Micro SDHC Card Slot Ethernet Port Audio Input / Output Digital Input / Output 1) Reset Button Step 1: Switch off IP device by disconnecting the power cable Step 2: Press and continue to hold the Reset Button (with a sharp tipped object, like a pen.)
Page 9
KCM-3211 Hardware User’s Manual default settings automatically. Restore to Default Power On Complete On (3s) Off (about 15s) Off (10~15s) Stay On About 20 Seconds 2) Power Button Press the Power Button and then camera will reboot automatically. 3) Ethernet Port The IP device connects to the Ethernet via a standard RJ45 connector.
Page 10
KCM-3211 Hardware User’s Manual protection against transient voltages. (Pin 5 – 8 repeats Pin 1-4 for another set of DIO) Connect input/output devices to the camera as follows: 1. Attach the cables for the device securely to the supplied green connector block.
KCM-3211 Hardware User’s Manual 2. Installation Procedure Connecting the IP Indoor Dome 1) Remove the cover Remove the dome cover by unscrewing the three attachments 2) Connect cables to connectors Please follow the instructions in the Physical Description section for how to connect to each connector.
KCM-3211 Hardware User’s Manual 3. Accessing Camera If you have DHCP server / router in your network: Many network server / routers are able to automatically provide IP addresses through DHCP. If you are using such a network, just plug in your computer and IP Box Cam into the network and your IP device will acquire network address by itself.
Page 15
KCM-3211 Hardware User’s Manual 4. Open Internet Explorer (Version 6.0 or above) , and type in the Default IP: 192.168.0.100 5. When you see the login window, please input default user and password: Default User: Admin Password: 123456 6. After logging in, you will see the video from camera. To go to the main menu, click the ”Setup”...
Page 16
KCM-3211 Hardware User’s Manual If you are using a single camera, this is enough to access the device. If you are using multiple devices, you need to change the current device to another unused IP address, so that when the next device is connected to the network, no two devices use the same IP.