The Icons On The Screen - TANDBERG MXP Series User Manual

MXP Series Video Endpoints
What's in this guide? Getting started Getting started

The icons on the screen

T
o help you immediately realize the
present status of important actions,
states, and events taking place, there
is a number of icons appearing on the
screen, whenever applicable.
Some of these may be turned off, if you
so wish. This is done from the Control
Panel > Icons.
Observe that the Control Panel settings
may have been password protected by
your system administrator.
D1479201 MXP Series User Guide, May 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
Making calls
Microphone Off. This indicator is shown
when the microphone is turned off.
Press the Mic off key of the remote
control to toggle between On and Off.
Volume Off. This indicator is shown
when the volume is turned off. Press
Volume + to turn the volume back on.
Dual Video Stream. Dual video stream
activated is indicated by this icon.
On Air. When you have the floor in
a conference this is indicated by the On
Air icon.
Using the phonebook In-call features
Not Secure Conference. This open
padlock indicator is shown during the
initialization phase for AES or DES
encryption. During this period the call is
not secure.
Secure Conference, AES. This double
padlock indicator is shown when AES
encryption (Secure Conference) is
active.
Secure Conference, AES. This double
padlock indicator is shown when AES
encryption (Secure Conference) is
active.
15
User Guide
Videoconferencing Contact us
Bad Network. This indicator appears if
the system detects network anomalies
like packet loss, jitter etc., during a call.
Open the menu by pressing the OK key
and select the warnings icon too see
details.
Telephone. This set of indicators is
shown when there also are telephone
only participants in a multi site
conference.
Indications are given for 1, 2, 3 or more
than 3 participants. Icons turn green
when a telephone participant has the
floor.
www.cisco.com