XFX PM102 C51 Installation Manual page 48

Chapter 4: Raid Setup and LED Error Codes
The "Array List" window will appear displaying the Raid array that is setup.
6. Use the arrow keys to select the array that you want to setup, and press <Enter>. The Array detail
window will appear.
7. If you want to mark this disk as empty and wipe out all its contents then press <C>.
8. At the prompt, press <Y> to wipe out all the data, otherwise press <N>.
9.Press <Enter> again to go back to the previous window and then press <F10> to exit
the RAID setup.
46