Page 9
XFX GeForce 9300 Motherboard KEYBOARD B: USB PORTS CLEAR COMS BUTTON SYSFAN1 HDMI PORT CPUFAN T: VGA PORT B: DVI PORT USB PORTS B: ESATA PORT JPWR2 T: LAN JACK NVIDIA B: USB PORTS MCP7AS REALTEK T: LINE-IN RTL8111C M: LINE-OUT...
Page 17
Be sure that the CPU fan assembly has enough clearance for the chassis covers to lock into place and for the expansion cards. Also make sure the CPU Fan assembly is aligned with the vents on the covers.
Note: On Chip ATA Devices On Chip SATA Controller [Enabled] Item Help RAID MODE [AHCI] AHCI Configuration [Press Enter] Disable: Displays normal POST messages. Enable: Displays OEM Logo instead of POST messages. :Move Enter:Select +/-/:Value F10:Save ESC: Exit F1: Help F8:Fail-Safe Defaults...
Page 32
XFX GeForce 9300 Motherboard Note that on the BIOS screens all data in white is for information only, data in yellow is changeable, data in blue is non-changeable, and data in a red box is highlighted for selection. CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrend, Inc...
Page 35
Configuring the BIOS CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrend, Inc Date (mm:dd:yy) Sat, Jul 01 2006 Item Help Time (hh:mm:ss) 12 : 48: Use [Enter], [TAB] SATA 1 [None Detectoed] or [SHIFT-TAB] to SATA 2 [None Detectoed] select a frield.
Page 36
XFX GeForce 9300 Motherboard Advance BIOS Features Full Screen Logo Display [Disabled] Item Help Quick Booting [Enabled] Boot up Num-Lock LED [On] Disable: Displays IOAPIC Function [Enabled] normal POST messages. MPS Table Version [1.4] Enable: Displays OEM Logo instead of POST Primary Graphic’s Adapter...
Page 37
Configuring the BIOS Integrated Peripherals USB Controller [Enabled] Item Help USB Device Legacy Support [Enabled] Onboard LAN Controller [Enabled] Options LAN Option ROM [Disabled] JMicron 363 ATA Controller [RAID+IDE Mode] Disabled AZALIA AUDIO [Internal Codec] Enabled On-Chip ATA Devices [Press Enter] ...
Page 38
XFX GeForce 9300 Motherboard Power Manegment Setup ACPI Function [Enabled] Item Help APCI Standby State [S1] Restore On AC Power Loss [Off] Wake Up Event Setup [Press Enter] :Move Enter:Select +/-/:Value F10:Save ESC: Exit F1: Help...