XFX PM102 C51 Installation Manual page 28

Chapter 3: BIOS Setup
Network Boot Priority [Press Enter]
This option is used to select the priority for network startup. After pressing <Enter>, you can select the
network using the <PageUp>/<PageDn> or Up/Down arrow keys, and change the network boot priority
using <+> or <->; you can exit this menu by pressing <Esc>.
CPU Internal Cache [Enable] by Default
This option is used to enable or disable the CPU internal cache.
Quick Power On Self Test [Enable] by Default
Enable to reduce the time for power on self test.
First/Second/Third Boot Device [Removable] [CDROM] [Hard Disk] by Defualt
This option allows you to set the boot device's sequence.
Boot Other Device [Enable] byby Default
With this function set to enable, the system will boot from some other devices if the first/second/third
boot devices failed.
Boot Up NumLock Status [On] by Default
This item defines if the keyboard Num Lock key is active when your system is started.
Security Option [Setup] by Default
When it is set to "Setup", a password is required to enter the CMOS Setup screen; When it is set to
"System", a password is required not only to enter CMOS Setup, but also to start up your PC.
APIC Mode
This option is used to enable or disable APIC function.
MPS Version Control For OS [1.4] by Default
This option is used to set up the version of MPS Table used in NT4.0 OS.
Full Screen LOGO Show [Disable] by Default
This option allows you to enable or disable the full-screen logo.
26